FSAB-60S_Product Center_Shanxi Fushen Energy Technology Co., Ltd.

Product Center

FSAB-60S

Product Features

Online Consultation

⊙ High refractoriness, reduces sand adhesion, and does not sinter due to disintegration
⊙ High sphericity, smooth surface, and low resin consumption
⊙ Low thermal expansion rate, few casting veins and crack defects, high dimensional accuracy of castings, and high yield of finished products
⊙ The material is dense, with high compressive strength, low crushing rate for repeated use, and high regeneration rate
⊙ Compared to molten ceramic sand, the bulk density is smaller, reducing the amount of molding sand used
⊙ The pH value is neutral and can be combined with various resins and binders, making it widely used
⊙ AFS indicators can be adjusted to meet different needs
⊙ Microscopic Photography

Product Parameters

Chemical Analysis

Composition	Al₂O₃	SiO₂	Fe₂O₃	TiO₂	Others
%	60-65	<35	<3	<3	<2

Physical Properties

Angularity Coefficient	Refractoriness	Bulk Density	Acid Demand Value	Loss On Ignition	Sintering Temperature
≤1.15	>1800℃	1.50-1.65 (g/cm³)	<5ml	<0.1%	1600℃

Typical Particle Size Distribution

Typical Particle Size Distribution of AB Sand Series (Ceramic Bead Sand)
Mesh		20	30	40	50	70	100	140	200	270	Pan	AFS
μm		825	600	425	300	212	150	106	75	53
Product Specification	30/50	≤4	25-35	40-60	15-25	≤3						30±3
	40/70		≤3	20-35	40-60	15-30	≤3					40±3
	50/100			≤5	25-40	40-55	10-25	≤5				50±3
	100/50			≤5	15-30	35-50	20-35	≤7	≤1			55±5
	70/100				≤10	40-60	30-50	≤10	≤2			60±5
	70/140				≤8	30-40	40-50	10-20	≤3	≤1		67±5
	140/70				≤4	15-30	35-50	25-35	≤5	≤2		75±5
	100/200				≤1	10-20	20-40	30-50	10-20	≤5	≤1	90±10
Particle size distribution can be adjusted according to customers' actual requirements